Home > Products > Dryer Machine > Three-drum Dryer

Three-drum Dryer

Processing capacity: 1-2200t/h

Feeding size: 125-250mm

Processing material: barite, calcite, coal, concrete, cement, gypsum, limestone, granite, rock and so on.

Send Email:info@sinoftm.com
Three-drum Dryer

If you are interested in our products, please contact us.

  • Response Time: <24h
  • Online Service: 24h
  • Factory Price: 100%

Brief Introduction to Fote Three-drum Dryer

The three-drum dryer is produced by improving the single cylinder dryer. The function of pre-drying wet material in advance is added inside the three-cylinder dryer. The three-cylinder dryer can prolong the drying time of wet material in the machine, and it has good sealing and can improve 50% to 80% of efficiency. Its operation is simple, and it has been widely praised after it is put on the market.

Three-drum Dryer

Advantages and Features of Three-drum Rotary Dryer

The three-drum roatry dryer is scientific, reasonable, high efficiency and energy saving. There are three layer structures in the three-cylinder dryer. Material in the cylinder can exchange with heat flow in the ways of radiation, convection, conduction and other forms. There are a variety of designs of feeding plate which can make material exchange with hot smoke and gas more fully and reduce the incidence of wind tunnel in the dryer.

Application Range of Three-drum Drying Machine

The three-drum drying machine has a wide application and can dry many materials, and it is often applied to dry the material in the industrial and agricultural production. It can also be used to dry the wet concentrate finally in the process of industrial beneficiation production. Applicable materials: brown coal, desulfurization gypsum, clay, kaolin, gypsum powder, silicon carbide powder, sawdust, etc.

Technical Parameter

Item/Unit/ModelΦ2.5×7mΦ2.7×7mΦ3.0×7.0mΦ3.2×7.0mΦ3.6×8m
Diameter of outer cylinder(m)2.52.73.03.23.6
Length of outer cylinder(m)777.07.08
Cylinder volume( m³ )16.6316.6352.67852.67881.38
Rotating speed of cylinder(rpm)4-104-104 -104 -104 -10
Initial moisture of slag(%)10-1210-1210-1210-1210-12
Final moisture of slag(%)11111
Initial moisture of yellow ground(%)8-108-108-108-108-10
Final moisture of yellow ground (%)0.5-10.5-10.5-10.5-10.5-1
Highest intake air temperature(℃)700-750℃700-750℃700-750℃700-750℃700-750℃
Production capacity(T/h)Yellow sand25-30
Slag20-25
Yellow sand30-35
Slag25-30
Yellow sand35-40
Slag30-35
Yellow sand45-50
Slag35-40
Yellow sand65-70
Slag60-65
Motor typeY2-132m-4EY2-132m-4EY2-160m-4Y2-160m-4Y2-160m-4
Motor power(kw)7.5×211×27.5×47.5×415×4
Reducer typeXWD7-23-11WXWD7-23-11WXWD6-23-7.5KWXWD6-23-7.5KWXWD8-23-15KW
Velocity ratio of reducer2929292929

SEND INQUIRY

Please enter your demand such as Raw material type, Capacity, Feeding material size, Final product size, etc.To become our quality clients will have access to a discount of contract!

CONTACT US

Address: High and New Industrial Zone, Kexue Revenue, High and New Technology Industrial Development Zone, Zhengzhou, China

E-mail: info@sinoftm.com

Tel: 0086-0371-69606666

JOIN OUR NEWSLETTER

Enter your email for more information

Online Consulting

Copyright 2015-2018 All Right Reserved Fote Machinery Co,Ltd.